How to use your paddle? – Maddle - EN

Insert the middle section of the Maddle Paddle in the lower section.
Press on the metallic button to insert the middle section all the way in the lower section. Make sure
the metallic button pops out of the hole in the lower section. You should hear a clicking sound to know it is properly in place.
Make sure the paddle’s blade is curved away from the user when setting up your paddle and at all
times when using it.
Insert the handle (upper) section of your Maddle Paddle into the mid-section. Make sure the handle is angled away from the user. The ridge along the length of the upper part will prevent the handle from turning during usage.
While standing up, set the tip of your Maddle Paddle on the ground. Adjust your Maddle Paddle’s length by pulling on the upper part of your Maddle Paddle. Raise your arm up and fold your wrist towards the front. Your wrist should fall over the t-grip (handle) while the paddle is touching the
ground.
Close the quick-release mechanism on the upper end of the middle part to lock desired height.
If the lock is loose, open the quick-release mechanism and turn the clip clockwise and close it. Repeat this process until it is properly snug. If you cannot close it because it is too tight, turn the clip counterclockwise.

Related articles